| Name | Range (Hz) |
|---|---|
| Narrowband | 300–3,400 |
| Wideband | 50–7,000 |
| Superwideband | 50–14,000 |
| Fullband | 20–20,000 |
A voice frequency (VF) or voice band is the range of audio frequencies used for the transmission of speech.
Frequency band
In telephony, the usable voice frequency band ranges from approximately 300 to 3400 Hz.[2] It is for this reason that the ultra low frequency band of the electromagnetic spectrum between 300 and 3000 Hz is also referred to as voice frequency, being the electromagnetic energy that represents acoustic energy at baseband. The bandwidth allocated for a single voice-frequency transmission channel is usually 4 kHz, including guard bands, allowing a sampling rate of 8 kHz to be used as the basis of the pulse-code modulation system used for the digital PSTN. Per the Nyquist–Shannon sampling theorem, the sampling frequency (8 kHz) must be at least twice the highest component of the voice frequency via appropriate filtering prior to sampling at discrete times (4 kHz) for effective reconstruction of the voice signal.
Fundamental frequency
The voiced speech of a typical adult male will have a fundamental frequency from 85 to 180 Hz, and that of a typical adult female from 165 to 255 Hz.[3][4] Thus, the fundamental frequency of most speech falls below the bottom of the voice frequency band as defined above. However, enough of the harmonic series will be present for the missing fundamental to create the impression of hearing the fundamental tone.
See also
References
- ^ Cox, R. V.; Neto, S. F. De Campos; Lamblin, C.; Sherif, M. H. (October 2009). "ITU-T coders for wideband, superwideband, and fullband speech communication [Series Editorial]". IEEE Communications Magazine. pp. 106–109. doi:10.1109/MCOM.2009.5273816.
- ^ https://www.its.bldrdoc.gov/fs-1037/dir-039/_5829.htm
- ^ Titze, I.R. (1994). Principles of Voice Production, Prentice Hall (currently published by NCVS.org) (pp. 188), ISBN 978-0-13-717893-3.
- ^ Baken, R. J. (1987). Clinical Measurement of Speech and Voice. London: Taylor and Francis Ltd. (pp. 177), ISBN 1-5659-3869-0.
This article incorporates public domain material from the General Services Administration document: "Federal Standard 1037C". (in support of MIL-STD-188)