Belted magnum

Belt can be seen just above the bottom (.300 Weatherby Magnum)

The term belted magnum^[1] or belted case refers to any cartridge, but generally a rifle cartridge, with a shell casing that has a pronounced "belt" around its base that continues 2–4 mm past the extractor groove.

This design originated with the British gunmaker Holland & Holland for the purpose of headspacing certain more powerful cartridges. Non-shouldered (non-"bottlenecked") magnum rifle cartridges especially could be pushed too far into the chamber and thus cause catastrophic failure of the gun when fired with excessive headspace. The addition of the belt to the casing prevented over-insertion. An example of an American adaption of this practice is seen in cartridges like the .458 Winchester Magnum, also a shoulderless heavy magnum.

Many subsequent cartridges of "magnum" nomenclature were based on the original .375 H&H cartridge, so over time the belt became something of a standardized attribute, expected as part of a "magnum" cartridge. Many cartridge designs of the last century include this belt, but do not really require it.

In the last decade or so, there has been a trend toward beltless magnums, virtually all of which are heavily shouldered designs that obviate the original motivation for a belt.

References